CPWS Blog
    Contact Us
    Position:Home > CPWS Blog

    Alternative EROWA ITS Chucking spigots from CPWS Chinese manufacturer economic cost

    2018-2-27      View:

    ITS-Integrated Tooling System ITS Chucking spigots

     

    ITS Chucking Spigot Manual

    ER-010742Chucking spigot F/M production
    1 unit

    EDM PPM
    VersionFixed type, manual. Bolt 12.9, without flushing hole.ApplicationIn pallets for chip-cutting machining processes.
    A chucking spigot is screwed into the pallet for the machinig cycle only. Since it has no influence on the reference position, it is removed for the purpose of space-saving storage. It is mounted again when the holder or pallet is used next time.

    ER-010751Chucking spigot F/M Inox
    20 pieces

    WEDM
    VersionFixed type, manual. Bolt stainless, without flushing hole. Set of 20 spigots.ApplicationOn RoboSet clamping frames.
    A chucking spigot is screwed into the pallet for the machinig cycle only. Since it has no influence on the reference position, it is removed for the purpose of space-saving storage. It is mounted again when the holder or pallet is used next time.

    ER-010755Chucking spigot F/M EDM for flushing
    20 pieces

    EDM PPM
    VersionFixed type, manual. Bolt with flushing hole.
    Set of 20 spigots.ApplicationIn Electrode Holders.
    For EDMing and easy machining.
    A chucking spigot is screwed into the pallet for the machinig cycle only. Since it has no influence on the reference position, it is removed for the purpose of space-saving storage. It is mounted again when the holder or pallet is used next time.

    ER-051381Chucking spigot F/M Production
    20 pieces

    EDM PPM
    VersionFixed type, manual. Bolt 12.9, without flushing hole.ApplicationIn pallets for chip-cutting machining processes.
    A chucking spigot is screwed into the pallet for the machinig cycle only. Since it has no influence on the reference position, it is removed for the purpose of space-saving storage. It is mounted again when the holder or pallet is used next time.
    Operating manual
     

    ITS Chucking Spigot Automatic

    ER-007980Chucking spigot F/A Inox
    20 pieces

    WEDM
    VersionFixed type, automatic. Bolt stainless, without flushing hole. Set of 20 spigots.ApplicationOn all holders used on UnoSet.
    A chucking spigot is screwed into the pallet for the machinig cycle only. Since it has no influence on the reference position, it is removed for the purpose of space-saving storage. It is mounted again when the holder or pallet is used next time.

    ER-015465Chucking spigot F/A EDM M10 x 45
    for flushing, 20 pieces

    EDM PPM
    VersionFixed type, automatic. Bolt with flushing hole. Set of 20 spigots.ApplicationFor electrode holder to be changed automatically. For EDM-ing and and machining with light cutting force.