CPWS Blog
    Contact Us
    Position:Home > CPWS Blog

    low cost EROWA sinker EDM tooling good Precision from China manufacturer CPWS

    2018-2-28      View:

    ITS Spindle Chuck Pneumatic

    ER-007521Rapid-action chuck automatic

    EDM
    VersionStandard type. Clamping power up to 2500 N.ConnectionsOn back.ApplicationEDM sinking machines with automatic electrode change, machine tools with automatic loading, production lines.
    Technical data ITS Chuck 
    Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 2‘500 N, generated by springs. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 140x140x140xmm (5.5x5.5x5.5“)

    ER-007523Rapid-action chuck automatic
    with shoulder for flushing

    EDM
    VersionShoulder for flushing connection. Clamping power up to 2500 N.ConnectionsOn back.ApplicationEDM sinking machines with automatic electrode change.
    Technical data ITS Chuck 
     Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 2‘500 N, generated by springs. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 140x140x140xmm (5.5x5.5x5.5“)

    ER-007580Manual rapid-action chuck

    EDM
    VersionWith flange ø 110 mm. Clamping power up to
    2500 N.ConnectionsHose coupling fitting on side.ApplicationRetrofitting on EDM sinking machines.
    Technical data ITS Chuck 
    Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 2‘500 N, generated by springs. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 140x140x140xmm (5.5x5.5x5.5“)

    ER-043123ITS chuck 100 P Inox without base plate

    EDM WEDM PPM
    VersionSteel, hardened, INOX.Clamping power5000 N.ConnectionsAt the rear, with two lines.OperationWith control unitNoteTo hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 andPM85 Precise.
     

    ER-055294ITS Chuck 50 Inox
    with base plate 80 x 120

    EDM WEDM PPM
    VersionSystem size 50, corrosion-resistant.Clamping power2800 N.AttachmentWith 4xM8 bolts from the front.ApplicationOn milling and grinding machines and on EDM/WEDM centers.NoteChuck can be operated manually or automatically. Pneumatic connections on the side of the chuck.
     

    ER-058250ITS Chuck 100 P with base plate ø100

    EDM PPM
    VersionSteel, hardened, with P-profile.Clamping power6000 N.ConnectionsAir valves, lateral.OperationWith air gun.ApplicationTo hold pallet ø 115 / ø 148 and pallets PM56, PM60, PM85 Precise.

    ER-082885ITS Chuck 100 P Inox
    with base plate ø 100

    EDM WEDM PPM
    VersionSteel,stainless, hardened, with P-profile.Clamping power5000 N.ConnectionsAir valves, lateral.OperationWith air jet.ApplicationTo hold pallet ø 115 / ø 148 and pallets PM56, PM60, PM85 Precise.
     

    ITS Quill Chuck Mechanic

    ER-038826QuickChuck 100 P / R

    EDM
    VersionOn a ø 110 mm base plate with a rotatable flushing connection.AttachmentWith 4 x M6 bolts.ApplicationOn EDM centers with quill rotation.NoteClamping power: up to 10000 N.

    ITS Table Chuck Pneumatic

    ER-007604Manual rapid-action chuck NSF

    EDM PPM
    VersionNSF = increased clamping power up to 7000 N.ConnectionsPneumatic valves on side, flushing on back.ApplicationElectrode fabrication general.NoteTo clamp pallets of ø 115 / ø 148, ø 72 and electrode holder 50.
    Pallets with P centering system are excluded.
     

    ER-007612Rapid-action chuck NSF on angle plate

    EDM PPM
    VersionStandard type on type G angle plate.
    NFS = increased clamping power up to 7000 N.ConnectionsPneumatic valves on the side, flushing through
    chucking spigot.ApplicationTo produce electrodes, and on EDM quill.NoteTo hold pallets ø 115 / ø 148, electrode holders, with the exception of pallets with a P-profile.

    ER-007623Rapid-chuck automatic
    on clamping plate

    EDM PPM
    VersionEnlarged centering prisms. NSF = increased clamping power up to 7000 N.ConnectionsOn side.ApplicationChip-removal machining of palletized workpieces.
    Technical data ITS Chuck NSF 
    Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 7‘000 N, generated by springs and air boost. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 140x140x140xmm (5.5x5.5x5.5“)

    ER-007625Rapid-action chuck automatic NSF

    EDM PPM
    VersionEnlarged centering prisms. NSF = increased clamping power up to 7000 N.ConnectionsOn back.ApplicationMilling and grinding machines, dividers.NoteBasic chuck for ER-007623 and ER-007533
    Technical data ITS Chuck NSF 
    Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 7‘000 N, generated by springs and air boost. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 140x140x140xmm (5.5x5.5x5.5“)

    ER-012297Rapid-action chuck NSF on block

    EDM PPM
    VersionNSF = increased clamping power up to 7000 N.ConnectionsPneumatic valves on side.ApplicationElectrode fabrication. For use in horizontal and vertical positions.NoteTo hold pallets ø 115 / ø 148, electrode holders, with the exception of pallets with a P-profile.
     

    ER-012299Rapid-action chuck NSF on plate

    EDM PPM
    VersionNSF = increased clamping power up to 7000 N.ConnectionsPneumatic valves on side.ApplicationElectrode fabrication, e.g. on magnetic plate.NoteTo hold pallets ø 115 / ø 148, electrode holders, with the exception of pallets with a P-profile.
     

    ER-035519ITS chuck 100 P 102 x 102

    EDM PPM
    VersionSteel, hardened.Clamping power6000 N.ConnectionsOn the side or at the rear, with two lines.OperationWith control unit or with air jet.ApplicationFor receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.

    ER-037970ITS Chuck 100 P without base plate

    EDM PPM
    VersionSteel, hardened.Clamping power6000 N.ConnectionsAt the rear, with two lines.OperationWith control unit.ApplicationFor receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
     

    ER-045076ITS Chuck 100 P 118 x 118

    EDM PPM
    VersionSteel, hardened.Clamping power6000 N.ConnectionsLaterally or at the rear, with two lines.OperationWith control unit or compressed-air jet.ApplicationFor receiving pallets ø 115 / ø 148, electrode holders, pallets PM56, PM60 and PM85 Precise.
     

    ER-100021ITS Chuck 100 P on angle pallet P ø 148

    EDM WEDM PPM
    VersionSteel, InoxConnectionsOn the side and rear for two air connections each.OperationWith control unit or with compressed air Jet.ApplicationAs chuck adaptor with a 90° angle.NoteFor picking up EROWA electrode holders and pallets, System 50, 100 and P-Profile.
    Operating manual
     

    ITS Table Chuck Pneumatic Stainless

    ER-007536Rapid-action chuck automatic
    with sealing cap

    EDM WEDM PPM
    VersionStainless. NSF = increased clamping power up to 7000 N.ConnectionsOn the side.ApplicationWith cooling/flushing water conducive to corrosion.
     

    ER-007620Rapid-action chuck automatic NSF Inox
    on base plate

    EDM WEDM PPM
    VersionStainless, NSF = increased clamping power up to 7000 N.ConnectionsOn the side.ApplicationWith cooling/flushing water conducive to corrosion.
     

    ER-007621Rapid-action chuck automatic NSF Inox

    EDM WEDM PPM
    VersionStainless, NSF = increased clamping power up to 7000 N.ConnectionsAt the rear.ApplicationWith cooling/flushing water conducive to corrosion.NoteBasic chuck for ER-007620 and ER-007536

    ER-008186Chuck 50 RSA
    with base plate 10 x 55.5 x 85

    EDM WEDM PPM
    VersionChuck 50 RSA, automatic, with pneumatic connection.Clamping power2800 N.ApplicationITS basis for the manual loading of ITS elements
    or for automatic operation.

    ER-043124ITS chuck 100 P Inox 102 x 102

    EDM WEDM PPM
    VersionSteel, hardened, INOX.Clamping power5000 N.ConnectionsOn the side or at the rear, with two lines.OperationWith control unit or with air jet.ApplicationTo hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.
     

    ER-047743ITS chuck 100 P Inox 118 x 118

    EDM WEDM PPM
    VersionSteel, hardened, stainlessClamping power5,000 NConnectionsLaterally or at the rear, with two lines.OperationWith control unit or with compressed-air jet.ApplicationTo hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.

    ER-048519ITS chuck 50 Inox

    EDM WEDM PPM
    VersionSystem size 50, corrosion-resistant.Clamping power2800 N.To be fittedwith 8 M5 bolts from the front.ApplicationFor fixtures produced by users themselves.NoteChuck can be operated manually or automatically. Air connections laterally or at the rear.

    ER-069153ITS Chuck 100 P Inox flat
    height 16 mm

    EDM PPM
    VersionSteel, hardened, with P-profilClamping power5000 N.ConnectionsAt the rear, with two lines.OperationWith control unitNoteTo hold pallets ø 115 / ø 148, electrode holders and pallets PM56, PM60 and PM85 Precise.

    ITS Table Chuck Mechanic

    ER-007697Screw chuck 50 D

    EDM PPM
    VersionOnly 20 mm overall height. For holders of
    system size 50.ConnectionsCentral flushing possible.ApplicationSmall lathes, on tapers, flanges, jigs and fixtures.

    ER-008257Screw chuck 100 special

    EDM PPM
    VersionOnly 23 mm height. For system sizes 50 and 100.ConnectionsCentral flushing possible.ApplicationOn small milling, drilling and grinding machines.
     

    ITS Table Chuck Mechanic Stainless

    ER-034387QuickChuck 50

    EDM WEDM PPM
    VersionSystem size 50, manual, corrosion‑resistant.Attachment4 x M8 from the rear or 4 x M6 stud bolts with nuts.ApplicationOn EDM/WEDM centers for light milling and grinding work. Max. revolutions on rotating axes 200min¹NoteClamping power up to 4000 N.

    ER-036345QuickChuck 100 P

    EDM WEDM PPM
    VersionSystem size 100, manual, corrosion-resistant.MountingWith four M8 bolts supplied.ApplicationTurning, milling, grinding or EDM/WEDM machines, in dividers and fixtures.NoteClamping power up to 10000 Nm. max. 3000 rpm.
     

    ER-038824QuickChuck 100 P with base plate

    EDM WEDM PPM
    VersionSystem size 100, manual, corrosion-resistant,
    with baseplate.MountingWith bolts or clamps.ApplicationMilling, grinding or EDM machines.Please noteClamping power up to 10000 N.
     

    Chuck Accessories

    ER-021839Adapter plate ø 120
    QuickChuck 100

    EDM
    VersionSteel, stainless, corrosion-resistant. With various attachment borehole patterns and lateral flushing connection.To fitWith 4 x M5, 4 x M6 or 4 x M8 bolts, on quills, adapter plates, etc.ApplicationAdaption to existing attachment borehole patterns and the QuickChucks 100/ Combi ER-015105/ ER022511.
     

    ER-011803Chuck 50 RSA without base plate

    EDM WEDM PPM
    VersionChuck 50 RSA, automatic with pneumatic valve.Clamping power2800 N.AttachmentWith 4 M6 bolts from the rear.ApplicationITS basis for the manual loading of ITS elements
    or for automatic operation.