CPWS Blog
    Contact Us
    Position:Home > CPWS Blog

    Precision power chuck made by CPWS--compatible EROWA chip removal workholding jig system

    2018-3-5      View:

     

    Power Chuck P PowerChuck P Chucks



    PowerChuck P standard Chuck

    ER-024312PowerChuck P 158 x 198

    EDM PPM
    VersionExtra-flat version. Height 51 mm.
    Base plate 158 mm x 198 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through
    the two lines on the side and at the rear.
    Technical data PowerChuck P 
    Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 10‘000N, generated by springs. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 160x160x250xmm (6.3x6.3x10“)

    Operating manual
     

    ER-029391PowerChuck P ø 150

    EDM PPM
    VersionExtra-flat version. Height 51 mm. Base plate ø 150 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through the two lines on the side and at the rear.
    Technical data PowerChuck P 
    Repeatability: 0.002 mm
    Indexing: 4x90° divisible
    Chuck clamping power: 10‘000N, generated by springs. 
    Chuck opens with: 6 bar compressed air

    Recommended workpiece size: 160x160x250xmm

    Operating manual
     

    ER-029392PowerChuck P ø 204

    EDM PPM
    VersionExtra-flat version. Height 51 mm. Base plate ø 204 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through the two lines on the side and at the rear.
    Technical data PowerChuck P 
    Repeatability: 0.002 mm 
    Indexing: 4x90° divisible
    Chuck clamping power: 10‘000N, generated by springs. 
    Chuck opens with: 6 bar compressed air

    Recommended workpiece size: 160x160x250xmm

    Operating manual
     

    ER-029436PowerChuck P without base plate

    EDM PPM
    VersionExtra flat version. Height 33 mm. Without base plate.ConnectionsAt the rear according the instruction manual.OperationPneumatically.
    Operating manual
     

    ER-044310PowerChuck P 158 x 230

    EDM PPM
    VersionExtra-flat version. Height 51 mm.
    Base plate 158 mm x 230 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airgun on the side. With control unit through
    the two lines on the side or at the rear.InformationThe borehole pattern of this plate fits 40mm and 50mm T-slot distances.
    Technical data PowerChuck P 
    Repeatability: 0.002 mm (0.00008“) 
    Indexing: 4x90° divisible
    Chuck clamping power: 10‘000N, generated by springs. 
    Chuck opens with: 6 bar (88 psi) compressed air

    Recommended workpiece size: 160x160x250xmm (6.3x6.3x10“)

    Operating manual
     

    PowerChuck P special Chucks

    ER-106250PowerChuck P with air ducts

    EDM PPM
    VersionExtra-flat version. Height 51 mm.
    Base plate ø 150 mm.
    With two lines each for operation of the chuck and air. conductConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through the two lines on the side and at the rear.
    Technical data PowerChuck P 
    Repeatability: 0.002 mm
    Indexing: 4x90° divisible
    Chuck clamping power: 10‘000N, generated by springs. 
    Chuck opens with: 6 bar compressed air

    Recommended workpiece size: 160x160x250xmm

    Operating manual
     

    ER-029422PowerChuck P / R

    EDM PPM
    VersionPowerChuck P with rotatable connection,
    max. 50 rpm.ConnectionsTwo lines to the rotatable connection.OperationWith control unit, manually and automatically.ApplicationFor use on dividing heads and round tables.
     
    CPWS is Chinese manufacturer of compatible EROWA,3R EDM,wire EDM jig workholding fixture clamping tools for tool die mould makers,CPWS make products at lower cost, good accuracy, fast shipping, www.workholdingtool.comwww.erowa-system3r-edm.com,