CPWS Blog
    Contact Us
    Position:Home > CPWS Blog

    economic EDM electrode holder,alternative EROWA EDM die sinking tools

    2018-2-28      View:

    China Precision Workholding System Inc    CPWS

    manufacturer of Compatible EROWA EDM tooling,chuck,electrode holders, components for ITS tooling system.

     

    Standard Pallets / Holders

    ER-009214Centering plate 50
    50 pieces

    EDM WEDM PPM
    VersionCorrosion-resistant, including
    4 supporting feet each.ApplicationSmall electrode weights.MountingMounted directly on plane surface of blank.
     
     

    ER-009219Uniplate
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, surface 51 x 51 mm faced, including 2 x M6 bolts for each unit.ApplicationTo mount electrodes and workpieces with a base surface of more than 50 mm.To fit blankWith 2 x M6 bolts into the base surface.

    ER-009222Prisround
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, square 26.5 mm milled, including
    2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with a base surface up to 25 mm.MountingInsert and tighten setscrews. If necessary, center
    with spacer plate ER-010532.

    ER-009226Uniblank
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, fitted without machining of body.ApplicationTo mount electrodes and workpieces of various shapes.MountingAs required.

    ER-010627Uniplate Alu 80 x 80
    4 pieces

    EDM PPM
    VersionSet of 4 units, aluminum, system size 100, with M8 supports.ApplicationTo mount electrodes and workpieces with a base surface of more than 70 mm.MountingWith 4 x M6 bolts into the base surface.

    ER-010793Uniholder
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, groove 20 mm faced, including
    2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with shaft sizes of up to 20 mm.MountingInsert and tighten setscrews. If necessary, center with spacer plate ER-010532.

    ER-011599Centering plate 100 M8
    10 pieces

    EDM WEDM PPM
    VersionCorrosion-resistant, including
    4 supporting feet M8 and 4 x M5 screws per plate.ApplicationWorkpieces and electrodes.MountingMounted directly on of blank plane surface of blank.
     

    ER-033717PC 210 Cover with RCS

    EDM PPM
    VersionAluminium anodized.ApplicationPrevents penetration of chips and dirt into the ProductionChuck 210. For automatic handling.

    ER-036657Centering plate G Inox
    1 unit

    EDM WEDM PPM
    VersionGround, including 8 supporting feet M8.ApplicationFor workpieces, jigs and fixtures in chip-removal machining.Fixation of blankAccording to accompanying fitting instructions.
     

    ER-036751Centering plate 50
    set of 5 units

    EDM WEDM PPM
    VersionCorrosion-resistant, including
    4 supporting feet each.ApplicationSmall electrode weights.MountingMounted directly on plane surface of blank.

    ER-050195Centering plate 100 M8
    1 unit

    EDM WEDM PPM
    VersionCorrosion-resistant, including
    4 supporting feet M8 and 4 x M5 screws per plate.ApplicationWorkpieces and electrodes.MountingMounted directly on of blank plane surface of blank.
     

    ER-103737Uniblank
    10 pieces

    EDM WEDM PPM
    VersionSet of 10 units, fitted without machining of body.ApplicationTo mount electrodes and workpieces of various shapes.MountingAs required.
     

    ER-103739Prisround
    10 pieces

    EDM WEDM PPM
    VersionSet of 10 units, square 26.5 mm milled, including
    2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with a base surface up to 25 mm.MountingInsert and tighten setscrews. If necessary, center
    with spacer plate ER-010532.
    Operating manual
     

    ER-103742Uniholder
    10 pieces

    EDM WEDM PPM
    VersionSet of 10 units, groove 20 mm faced, including
    2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with shaft sizes of up to 20 mm.MountingInsert and tighten setscrews. If necessary, center with spacer plate ER-010532.
    Operating manual
     

    ER-103744Uniplate
    10 pieces

    EDM WEDM PPM
    VersionSet of 10 units, surface 51 x 51 mm faced, including 2 x M6 bolts for each unit.ApplicationTo mount electrodes and workpieces with a base surface of more than 50 mm.To fit blankWith 2 x M6 bolts into the base surface.
    Operating manual
     

    EWIS compatible Holders & Pallets

    ER-009223Uniholder EWISTM
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, prepared for the installation of the code carrier. Order EWISTM chip, ER-035154 separately!

    ER-010063Prisround EWISTM
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, prepared for the installation of the code carrier. Order EWISTM chip, ER-035154 separately!

    ER-010596Uniblank EWISTM
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, prepared for the installation of the code carrier. Order EWISTM chip, ER-035154 separately!

    ER-010644Uniplate EWISTM
    12 pieces

    EDM WEDM PPM
    VersionSet of 12 units, prepared for the installation of the code carrier. Order EWISTM chip, ER-035154 separately!

    ER-035097Blank holder ø 20 / ø 72
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, system size ITS 50.
    Without chucking spigots.ApplicationTo clamp cylindrical parts with ø 20 mm.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080"
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-035114Blank holder ø 10 / ø 72
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, system size ITS 50.
    Without chucking spigots.ApplicationTo clamp cylindrical parts with ø 10 mm.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080"
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-035117Blank holder ø 72 without borehole
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, system size ITS 50.
    Without chucking spigots.ApplicationTo clamp cylindrical parts.MountingAttachment borehole up to max. ø 12 mm to be drilled according to requirements.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080"
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-035209Prisround ø 72
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, system size ITS 50.
    Without chucking spigots.ApplicationTo mount electrodes and workpieces with shafts
    of up to square 25 mm.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080“
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-035210Uniblank ø 72
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, system size ITS 50.
    Without chucking spigots.ApplicationTo mount electrodes and workpieces of various shapes.MountingAttachment boreholes to be drilled according to requirements.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080“
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-035211Uniholder ø 72
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, system size ITS 50.
    Without chucking spigots.ApplicationTo mount electrodes and workpieces with shaft
    of up to 20 mm.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080"
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-035212Uniplate ø 72
    6 pieces

    EDM WEDM PPM
    VersionSet of 6 units, includes 12 PinLock locking pins. System size ITS 50, without chucking spigots.ApplicationTo mount electrodes and workpieces with surface more than square 40 x 40 mm or ø 50 mm.MountingWith two PinLock locking pins.
    Technical data EROWA Holder ø 72
    Material: Steel, corrosion-resistant
    System accuracy, chuck: 0.002 mm / 0.00080"
    Recommended max. weight with electrode: 20 kg / 44 lbs
    Handling: With EROWA handling systems or electrode changers.

    ER-036658Centering plate G Inox
    5 pieces

    EDM WEDM PPM
    VersionGround including 8 supporting feet M8 per plate.ApplicationFor workpieces, jigs and fixtures in chip-removal machining.MountingAccording to accompanying fitting instructions.
     

    ER-044099ITS Electrode holder Set
    12 pieces